1. INTRODUCTION
Auto-Scanner For Benz is newly developed and specially designed for car owners
or DIYs. With a Auto Scanner, you may quickly find out trouble causes of
electronically controlled systems on your car by reading the trouble code (DTC)
shown on Auto-Scanner and checking out trouble causes with attached MANUAL.
Though so small, it is of the same function as special tool of its kind and
applicable to C ?Class
(C180,C200,C230,C240,C320,C55,C32,CLK200,CLK240,CLK320,CLK500,CLK55,CL500,CL600,CL55,CL65)
2. FUNCTIONS
Reading trouble codes: when press the ?read? button, the Auto Scanner
will Read DTCs of powertrain system one by one.
Clearing trouble codes: when press the ?clear? button, the Auto Scanner
will clear DTCs of powertrain system.
3. OPERATIONS
When the ?CHECK ENGINE? light is on, stop the car and apply the parking
brake, start the engine then plug the Auto Scanner to the 16-pin socket
usually located under the instrument panel in the car.
It will display the brand name ?UIF? twice . then press the ?READ? button, it
will read the trouble code reader trouble code and display 3 times. If there is
no trouble codes, it will display [-- -- -- --].
When press the ?ERASE? button, it will clear the trouble codes.
In case that Auto Scanner can not be plugged in directly or codes can not

be seen due to socket facing downward, use the extension cable with the
female plug to connect with Auto Scanner and 16pin plug with socket.

4. DIMENSIONS
10*5*3(cm) length is 80 cm